Universal TV Backlight Kit with USB Switch | New Product

We are proud to introduce our newest product: the Universal TV Backlight Kit with USB Switch, available in two customizable sizes. This kit is a new variation of our already popular Universal TV Backlight Kit with standard on and off switch (available on our website) & our original TV backlight kits for wall mounted and table mounted televisions (available on Amazon).

Our newly innovated USB switch allows you to control your backlight kit with ease: Your LED light strip will turn on and off with your TV. No more getting off of the couch or out of bed to turn your lights off! Once your TV powers down, so will your lights.

Benefits of a TV Backlight with USB Switch:

Provides bias lighting to reduce eye strain- TV shows have drastic changes in brightness. The LED lighting reduces the range of motion in the muscles of the iris that this causes eye fatigue
More vivid colors and crisper images
Rated to last up to 10,000 hours
Turns on and off with the television
LEDs do not generate heat like other lights- will preserve the life of your TV
Is powered by a power supply and not your TV. The USB switch acts as only a switch and not a power source, which also will preserve the life of your TV.

The Large TV Backlight Kit is recommended for flat screen TVs up to 42″.

This kit includes:

79.5″ Normal Bright Cool White Flexible Strip (to be installed in an upside down “U” shape for wall mounted TVs or across the middle for table mounted TVs)
Mini 1 amp Power Supply
USB Switch
USB Cable
2 Foot Interconnect Cable
2 Cable clamps

The Gigantic TV Backlight Kit is recommended for flat screen TVs up to 75″.

This kit includes:

139″ Normal Bright Cool White Flexible Strip (to be installed in an upside down “U” shape for wall mounted TVs or across the middle for table mounted TVs)
Mini 1 amp Power Supply
USB Switch
USB Cable
2 Foot Interconnect Cable
2 Cable Clamps

Instructions to Install TV Backlight Kit with USB Switch

Remove all dust and dirt from backside of television.
Mount LEDs around backside perimeter of television: Begin by peeling the adhesive liner from connector end of LED strip and sticking exposed adhesive to television. Continue to peel and stick LED strip around the perimeter of television.
Remove un-used portion LED strip by cutting at the defined cut point – the copper ovals every 4”.
Remove adhesive liner from USB Switch. Mount USB Switch within 2′ of LED Strip input.
Plug USB cable into USB port on television.
Plug micro USB connector into USB Switch input.
Use 2′ interconnect cable to link USB Switch and LED input.
Plug Power Supply into electrical outlet. Plug Power Supply output lead into remaining USB Switch input.