The 10″ Designer Series LED Panels are ideally suited for under the cabinet task lighting applications, kitchen lighting, jewelry lighting, decorative lighting, and reading lighting. Additional light panels are sold individually, in panel packs, or kits and can be mixed and matched to create a system.
The 10″ Designer Series Panels are identical to the Pro Series 21 LED panels, except for the lens housing that creates a more finished look with increased durability. They are preferable over the Pro Series for the areas where your LEDs will be visible. The Designer Series Panels have a single row of LEDs.
Unlike our other kits, the Hardwire Kitchen Kit allows you to hardwire a dimmable transformer to a wall dimmer and your Inspired LED lights in order to easily control your kitchen lighting.
(10) 10″ Designer Series panels
(1) 40 Watt electronic transformer
(1) Lutron CFL/LED wall dimmer
(10) 3 Foot interconnect cables
(20) Cable clamps and screws
One cable will have the connector cut off and will be wire-nutted to the transformer’s output. The cable side with white writing will be the positive side.
If you need different cable sizes, you may choose any ten of the following cables: 4”, 1’, 2’, 3’, 4′, 6’, and 12’ cables. Please add a note at check out mentioning which cables you need.
Luminosity: 130-145 lumens per foot (depending on color)
Wattage: 1.5 watts per panel
Dimensions: 10” x 0.87” x 0.75”
i Subtract 1.5″ from your dimensions on each side of the flexible strip to allow room for interconnect cable installation.